Masteelf 2 Pcs Display Module LED External Work Lights Number Indicator

Description

This module uses TM1637 driver to drive four standard anode tubes. It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module.

Features

- Color: As shown.
- Material: Resin.
- Size: 4.00X2.00X0.30cm/1.57X0.79X0.12in.
- Supply voltage: 3.3V-5V DC
- Module current: 30-80mA (When 5V supply power)
- The Positioning holes in this LED Display Module 4 Bits has 4 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination.
- The unit easily connects through the VCC, GND, and CLK pin and displays the digits in red light.
- Thanks to the I2C Bus you can control it using only 2 wires, leaving more pin available on your to connect other things.
- This unit is suitable for uses in induction cooker, micro-wave oven and small household electrical appliance.
- It also has a clock point, this allows you to Move away from the Serial Monitor to display values from your sensor by using this simple to use 4 Bits 8 segment LED module.