Loba Viva - One Component water-based finish for hardwood flooring.

• Excellent chemical and abrasion resistance
• Powerful resistance to plasticizer migration from wood flooring adhesives
• Easy to use, no foaming or lap marks
• Fully cured after 5 days
• Non-yellowing
• Low in emission, awarded the EMICODE® EC1 label
• Full “Connected Systems” approval

LOBA roller Microfiber 100-120T-barTrim pad Lamb's wool Brush Roller

500-600 square feet per gallon per coat.

• Earliest possible recoating after 2-3 hours.
• Fully cured after 5 days.
• If there is a delay in drying wait until you can see that the surface is completely dry.

• Apply one coat of Easy Prime according to directions.
• Allow to dry for 60-90 min.
• Apply Viva.
• Allow to dry for 2-3 hours.
• Intermediate sanding with LOBASAND perforated pad 180 (or equivalent) to remove grain raise.
• Vacuum floor then tacks using a LOBA Mop and a new/clean LOBA microfiber mop pad lightly dampened with water to remove all dust.
• Apply Viva.