LUVERNE 583098-570938 O-Mega II 98-Inch Silver Aluminum Wheel to Wheel Side Steps, Select Dodge, Ram 1500

Good looking running board. Instructions leave a lot to be desired. Especially the part where, on a 2019 F250 with the wheel to wheel boards, you have to back out the front leaf spring bolt to get the bracket in. This requires a 1-1/4" socket and about 500 ft lbs of torque- all my impact wrench could generate. The instructions say retorque to factory specs- but they do not provide this number. This fact needs to be more clear as a lot of folks cannot install this board at home. Also it would be very helpful if the distance from the ground to the top of the board was published. This board is about 2" higher than the Ford factory steps. That 2" is a lot for my 5' tall wife. I wanted something the same height as factory or even a little lower but no one publishes the distance from ground to top of board. Means it is potluck when buying any type of step or running board. Installation took me about 4 hours but almost 1/2 was dealing with the rear bracket and the leaf spring bolts.

We were very pleased with our purchase and our customer really liked them. Everything was there and easy to install. We would purchase these again if needed and Real Truck was easy to work with.