Inflatable Boat Motor Mount Durable Kayak Outboard Motor Bracket Rectangular Racket

Description
Our Inflatable Boat Motor Bracket Is Made of 304 Stainless Steel, Pp, and Pvc Materials, Which Is Strong and Durable, Corrosion-resistant and Rust-proof, and Can Extend Its Service Life. at the Same Time, the Spraying Process Makes Its Surface Smooth, Easy to Clean, and Comfortable to Touch. It Is a Good Helper to Assist Your Motor to Be Steadily Installed on the Inflatable Boat.

Details
4 Washers: They Can Increase the Friction Between the Screws and Nuts and Improve the Stability of the Bracket.
Pre-drilled Holes: They Can Help You Finish the Installation Faster and Eliminate the Trouble of Drilling Holes Yourself.

Application
It Is Suitable for Most Inflatable Boats, Compatible with Most Newer Models of Index Boats, and Can Be Used for Support Motors, Gas Motors, Stern Hookups, Outboards, Stern Motors, and Electric Outboard Motors.

Installation
First, Inflate the Inflatable Boat (Not Included), and Then Mark the Position of the Buckle to Be Installed with a Pen. Clean Thoroughly and Release a Little More Air for Better Flattening.
If the Buckle Is Hard in Winter, Use Hot Air to Soften It a Bit. If Conditions Permit, You Can File the Buckle with a File (Not Included) to Remove Any Burrs and Achieve Better Results.
Apply Kayak-specific Adhesive (Not Included) to the Hull Position and Buckle Area.
After 2-3 Minutes, Wait for the Adhesive to Dry, and Then Apply It. If You Use a Hair Dryer (Not Included) to Heat It up a Bit (Slightly Hot to the Hand), the Effect Will Be Better.
The Area Where the Buckle Is Bonded to the Hull Should Be Compacted with a Heavy Object. (the Method of Filling in the Leak Is the Same)
It Can Be Used After Being Left for 24 Hours.

Specification
Color: Black
Material: 304 Stainless Steel, Pp, Pvc
Finish Type: Spraying
Operation Mode: Electric
Recommended Uses: ‎for Inflatable Boats
Number of Items:‎1
Shape: Rectangular
Sport Type: ‎boating
Assembly Required: Yes
Gross Weight: 2kg/4.41 Lbs
Product Size: 25.5*15*26cm/10*5.9*10.2in
Package Size: 28*25*10cm/11*9.84*3.93in

Package Included
1*Boat Motor Mount Racket
All Accessories for Assembly

Notes
This Product Only Includes the Motor Bracket, Not the Boat and Motor.
This Product Does Not Include Glue, You Need to Buy Glue for Inflatable Boats.
Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.