Fabricate cabinets square, rigid and without warp, with metal faces flat and free from dents or distortion- Make all exposed metal edges safe to touch- Weld frame members together to form rigid, one-piece structure- Weld, bolt, or rivet other joints and connections as standard with manufacturer- Grind exposed welds flush- Do not expose bolts or rivet heads on fronts of cabinet doors or frames-22 Gauge body-22 Gauge Shelves adjust on 2 in- center-22 Gauge door with 16 Gauge frame-16 Gauge continuous piano hinge-200 lb shelf capacity-Doors include key lock and 3-point turn handle-Door Type - Double Safety-View Door-Type - Single Tier-1-Wide-Knock-down-Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members- Cross frame members of 16 gauge channel shapes shall be securely welded to the vertical framing members to ensure rigidity- Bottom frame member to be not less than 4 in- high-DoorsFabricate back and sides of 22 gauge (minimum) sheet steel- Sides to include a single bend at the vertical edges which overlap the offset of the vertical edge on the rear panel- Adjustable shelf retainer strips are to be spot welded to the inner side panels allowing shelf adjustment on 2 in- centers- Form top and bottom of 22 gauge (minimum) sheet steel bolted at all four sides- SKU: 000GRP-HLWL3864
