HT16K33 LED Display Module 4 Digit 7 Segment 0.56 Inch Time Clock Indicator Tube Module Red

1. This 0.56-inch 4-bit 7-segment display module comes with a clock function.
2. This 7-segment display matrix is multiplexed, and to control all 7-segment LEDs, you need 14 pins.
3. This module can easily add a 4-digit digital display with a decimal point, which can be used to create the "second colon point" of a clock.
4. Using a matrix driver chip (HT16K33) perform multiplexing . You need to send an to the chip, telling it which LEDs to light up, and it handle it .
5. As it only uses for control, it can be used with any development board and can share pins with other sensors or displays.
Display screen: 0.56 inches
The board/chip uses an 7-bit address between 0x70-0x77, which can be by jumper; 4-digit 7-segment LED matrix display screen, ultra bright 4-digit 0.56-inch high blue 7-segment display screen; Paired with pins, the matrix can be fixed to the development board, which is very easy to operate and only takes about 5 minutes!
Display Type: 4-bit 7 Segment Display
Driver: HT16K33
PCB Board Size: 50mm x 23mm
7-Segment Monitor Size: 50mm x 19mm
Interface:
Color: Red
Material: PCB

Package Contents:
1 * Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.