Fiddes Hard Wax Oil - Satin Clear Paint Finish - 2.5L (Wood Finish)

Fiddes Hard Wax Oil is a highly hard-wearing, non-yellowing and easy to apply finishing oil perfect for wooden floors, kitchen surfaces, children's toys, skirting, furniture, even unsealed terracotta and quarry tiles!

FEATURES:

• A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear
• Produces a quick drying, natural satin
• Water repellent, 4 hours dry time and easy to apply
• Tread-fast finishes that will not peel or flake
• Conforms to EN71-3 safe for toys
• 24 square metre per litre per coat and minimum two coats required

PREPARATION:

Ensure all surfaces are clean, dry, and free from any previous finish. Sand, the substrate with a fine 150-grade. Sandpaper or sanding disc, removing all traces of dust.

Make sure the area is well-ventilated before application. Test on a small area before applying. No primer required. Maximum 2 coats recommended. Use at room temperature. NO THINNING REQUIRED.

First Coat- Stir contents before and during use, and apply in a warm, well-ventilated room. Apply THIN coat only using a quality synthetic brush or cloth, and lay EVENLY, following the direction of the grain. Make sure there is no extra material if so remove any excess material with a cloth as soon as possible. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight.

Second Coat - Application and drying instructions are the same as the first coat. Clean applicator with White Spirit.When the surface area is completely dry, a light buff will further enhance the sheen level.