Description
LCD Display
Specifications:
- Rated Voltage: 220V
- Rated Power: 6500W
-Current: 30A
- Color: Gold/Black
- Heating Material: Aluminum
- Water Temperature Range: 68-126°F
- Start-Up Pressure: 0.4-0.6MPa
- Waterproof Rate: IPX4
- Size: Approx. 26.5*20*7.8cm/ 10.43x 7.87 x 3.08"
NOTICE:
1.The water heater should be connected to a larger than 40 amps circuit breaker instead of a socket, and the wire needs to be more than 4 square meters. It can be used in kithcen, bathroom, salon,etc.
2.Freely adjust water temperature by water flow.
3.Please note this item should get the water first and then link the electricity when installing.
4.You'd better install this item vertically to ensure long service time.
5.If you encounter problems during installation and use, please contact customer service for consultation
Installation Steps
1.Drill into the wall with electric drill
2.Fixing the water heater with screws
3.Connecting hot water outlet & cold water inlet,and let cold water go through water heater
4.Connecting water heater to electricity
5.Testing water heater and finished
Malfunction & Solution
Package Included:
- 1 x Electric Water Heater
-1 x Manual
Malfunction
1.No hot water running out
No cold water going through water heater, low water pressure or water inlet blocked up
Awaiting cold water, using under normal water pressure, cleaning the water inlet filter
2.Water leaking from water outlet or water inlet
Shower hose or flexible hose is not well sealed
Reconnecting or change another hose
3.E1 on display
Temperature excursion
Turn off water heater, and let cold water go through it for a while
4.E2 on display
Electric leaking
Please contact customer service
5.E3 on display
Malfunction of temperature probe
Please contact customer service
