Chamberlain C2405 Wi Fi Garage Door Opener with Wireless Keypad and MyQ App

I installed and programmed the unit myself for the most part. A neighbor helped me for about an hour when we hung the unit. I used BILT instructions for most of it. I found BILT instructions lacking when it came to programming the unit. I found a YouTube video that helped with that and had no issues programming the unit. I had no issues adding the unit to my WiFi or syncing it with the MyQ app. Things that could be better: The Chamberlain replaced a unit from another vendor so I could not reuse the mounting hardware and the Chamberlain ships with no mounting hardware for the motor unit. My neighbor and I had to design and fabricate a mounting solution which we did from materials that I had and his angle grinder, This was within our combined skill sets but took time. The other issue is the sensor mounting brackets which are designed to clip on to the door rails. My house was built in 1929 and the door travels on some pretty beefy rails that these clips don't come close to fitting (not too surprising). I used a couple blocks of wood, mounted them parallel to the rails and the sensors found each other the first on the first try. I did tweak the receiver using the provided toggle bolt adjustment to establish and maintain a solid lock. One last thing: I cannot link the unit with the HomeLink in my 2021 Honda Ridgeline Black Edition. I also cannot find documentation that defines if this should or should not work. Please clarify. To be clear. The answer should be YES In closing, after a week, the unit works great. Lots of features. It's great to have a working garage door opener again!