Freud D0756F 7-1/4" 56T Steel Demon Ferrous Metal Circular Saw

Bought this blade for my niece's 7 1/4" circular saw, due to the stock blade 24T would tear the plywood we needed to cut. The only blade available in the only store in town. I new it was primarily good for thin metal, but the venier plywood would be also be good for the count of teeth on the blade. Upon cutting the wood, very fine splinters, easily smoothed out and capped. The second job we installed a stainless cooktop hood. The exhaust pipe was covered bt a stainless steel U-shaped finished square fasad. Tip snips would have pinched it due to its 7" sides. So we dressed up goggles, gloves, saw after measuring three times, we cut the stainless using a wood filler to keep the stainless from wrenching with the blade. To my amazement, the finished cut was as smooth as a pull-top tuna can. No burns, clean smooth as burrless. It was my first cutting metal with a circular. Usually use a grinder, however, this blade opened my mind for other thin metal, 1/16" metal projects. Thank you Diablo.