The Yonico 14189 T-Track Router Bit cuts T-slots for T-track bolts with 1-1/8" wide x 5-16" high bolt heads and up to with 3/8" shaft thickness. Can also be used to make slat wall boards. T-slot router bits are great for creating T-channels for jig and clamp applications and keyholes for hanging projects. It is recommended that a straight groove, matching width to the upper part of the "T", be cut into the workpiece prior to routing the T-slot to reduce the stress on the bit. T-slot cuts produce a lot of wood chips with little room for them to escape and can cause the bit to get bogged down. Go easy on the feed and back off every couple of inches before resuming with the cut.
This t-track and t-slot Router bit cuts slots for bolts that have a 1-1/8" wide x 5/16" high heads with up to 7/16" shaft diameter. Can also be used to make slat wall boards. The shank is 1/2" in diameter. Create t slots for custom jigs and hold-downs or for picture frame keyhole hanging. Premium C3 micro-grain Carbide blades for a sharper & longer lasting edge
