Duplicolor HWP102 - 4 Pack Wheel Coating Spray Paint Graphite - 12 oz

i purchased duplicate wheel paint to upgrade and restore my 2008 Mazda three aluminum rims. I would highly recommend it to anyone. The only requirement is that prep is essential. I highly recommend that you take the rims off the car, clean them thoroughly and degrease. Then sand and clean again with a solvent such as acetone or isopropyl alcohol then sand and clean again with a solvent such as acetone or isopropyl alcohol. Pay particular tension to the instructions on the can, and do the three light coats followed by the medium coat all within an hour. The result was very good. The only addition was that I found it necessary to clearcoat, which is recommended on the can as well pay particular attention to the instructions on the can, and do the three light coats filed by the medium coat all within an hour. The result was very good. The only addition was that I found it necessary to clearcoat, which is recommended on the can as well. The results were wonderful. The only fault was the clearcoat which was another company did not have a fan spray nozzle like the duplicate the results were wonderful. The only fault was the clearcoat which was another company did not have a fan spray nozzle like the duplicolor nozzle. The clearcoat produced some runs. Other than that, it went as planned.