Black & Yellow Motorcycle Hand Grips 7/8 Handlebars GSXR GSF CBR RR Ninja ZX YZF

1 Pair - Universal Motorcycle Hand Grips
Black Grip -Yellow Inset - Throttle and Clutch Grips

Unique color inset universal OEM Replacement Hand Grips for Clip-ons / Handlebars. Made ofstrong, durable rubber that increases grip, reduces vibration, stands up to constant abuse, and treated to reduce UV damage.Features strategically located slits (withYellow inset color) to give extra grip for easy, accurate throttle control. These are closed-ended grips; therefore, you would have to cut out the end to accommodate a Bar End application.

Stats:
Name: Helios

Dimensions: Multiple, please see photo(s) for approximate measurements

Housing: Black Rubberized with Compression Fit

Inset Color: Yellow

Fitment: 7/8 Inch Diameter OEM Handlebarsor 7/8 Inch Aftermarket Handlebars

Fitment Information: Our Hand Grips are Universal; therefore, can be used on all types of Powersport Handlebars: Sportbikes, Cruisers, Cafe Racers, Bobbers, Choppers, Scooters, ATV, Quad, MX, Dirt Bike, Enduro, and Dual Sport

.

Install Notes: When you open the package you will notice that one grip has a larger inner diameter than the other. The larger inner diameter grip is for the Throttle side (right side), while the smaller inner diameter is for the Clutch side (left side). Remove your old grips from the handlebar. Then clean all of the glue and dirt residue from the throttle plastic and the handlebar. You will not use glue to install our hand grips because they are designed with a compression fit. To slide them on easier, we recommend using warm soapy water or glass cleaner; these liquids will evaporate upon drying. Do not use petroleum based lubricants as they will leave a slick residue, allowing the grip to slide off easily while riding. Do not use compressed air or a screwdriver to install as this could result in blowing out the side or damaging the graphics. Once applied and your happy with them you may want to install Bar Ends. If so, you will have to modify the grips by cutting the end out; by modifying you void warranty. To Start we recommend using a sharp X-Acto knife and with the grips installed, simply cut the end out using the inner wall of the Handlebars as a guide. Additional trimming may be required to facilitate proper Throttle Control with Bar Ends installed.