1AutoDepot 3500 lbs Electric Power Tongue Jack w/ Waterproof Cover for RV Trailer and Camper

About this item

• Durable and Sturdy: Heavy-gauge steel construction ensures durability and strength; Black powder coat finish resists rust and corrosion; Durable, textured-housing prevents chips and cracks.
• Electric jack lets you raise and lower your A-frame trailer quickly and easily. 3,500 lbs. lift capacity, a low maintenance 12V DC electric gear motor. Provides 18” lift, retracted 9 inch, extended 27”, drop leg extra 5-5/8” lift. Outer tube dia.: 2-1/4", inner tube dia.: 2".
• To ensure great performance even at night, this jack also comes with a front-facing LED light . The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.
• Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time.
• Warranty:  1 YEAR WARRANTY.

Features

• Attach the jack using three bolts (grade 5, 3/8”-16 UNC bolts with washers and nuts or 3/8”-16.
• Self-tapping bolts are recommended.
• Place the star washers between the flat washers and mounting
• Plate as shown in Fig .
• The star washers are intended to penetrate through the paint on the
• Mounting plate to ensure direct metal to metal contact. Bolts should be tightened to 15-20 ft-lb.
• If a lower support plate is not already present, install one in the bottom of the trailer frame.

Specs

• Models Applicable:JA-ETJ35-1-HH-P
• Maximum Lift Capacity: 3500 lbs (continuous use)
• Retracted Height:30”
• Vertical Travel: 18”
• Power Requirements: 12V DC
• Outer Tube Diameter: 2 1/5”
• Power Cord Length: 6’,#12 gauge UL Wire
• Foot Pad Diameter:6”
• LED Work Lights For Easy Nighttime Hookups
• Shipping Weight: 23.15lbs

About jacks

• CONTENTS OF KIT:
• Removable Foot Pad
• 3/8” Safety Lock Pin
• Manual Crank Handle
• Three 3/8” Star Washers
• TOOLS REQUIRED:
• 9/16” Wrench
• Torque Wrench
• Wire Cutters
• Wire Strippers
• Crimpers or Soldering Iron

Economy

Park your trailer on a level surface and block all dolly and trailer tires. Before operating the jack,attach the foot with the 3/8” safety lock pin provided.

• Disconnect the jack from the power source.
• Remove the rubber access cover on the top of the jack.
• Insert the manual crank handle into the access hole on the top of the jack, engaging the drive screw.
• Rotate the manual crank handle counter-clockwise to extend the jack, and clockwise to retract it.
• Remove manual crank handle and replace manual override plug.