2 Pack Remotes For Dodge Dakota Ram Durango Remote Star KOBDT04A OHT692714AA

2PCS Key remotes FCC ID: KOBDT04A OHT692714AA Part Number: 68002316AA Interchange Part Number(s): 3521A-T04B Compatibility Chrysler | Dodge | Jeep 2007-2015 Jeep Compass 2007-2015 Jeep Wrangler 2010-2016 Jeep Patriot 2010-2012 Dodge Caliber 2007-2011 Dodge Nitro 2009 Dodge Durango 2008-2010 Dodge Dakota 2007-2010 Dodge Ram 2007-2009 Chrysler Aspen Programming **You must have Two working keys to perform this procedure. If you do not have 2 working keys, you must take your vehicle to a dealership or automotive locksmith for programming.** Obtain all remote transmitters for this vehicle. 1. Cut the new key to match existing keys. 2. Insert the first valid/working key into the ignition switch. Turn the ignition switch to the ON position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key. 3. Insert the second valid/working key into the ignition switch. Turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addition, the vehicle security light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. 4. Insert a new/blank key into the ignition switch. Turn the ignition switch to the ON position within 60 seconds. After 10 seconds a single chime will sound. In addition, the vehicle security light will stop flashing. To indicate that programming is complete, the vehicle Security light will turn on again for three seconds and then turn off. 5. The new key is now programmed. The remote Keyless Entry transmitter will also be programmed during this procedure. 6. Repeat this procedure to program up to eight keys. Please refer to your owners manual if you are uncertain of the location of Lock and or On.