Pack of 10 ORGAN® DCX1F Ball-Point Sewing Needles for Babylock Portable Serger / Overlock Machines.
Ball Point (BP) needles are designed to alleviate making holes in knit or loosely woven materials. The cross fibers which constitute the knit or loosely woven materials are relatively far apart as compared to those in tightly woven material. When a needle with a standard "sharp" point encounters one of those fibers in penetrating the fabric, it cuts right through the fiber. This creates a hole in the fabric. The Ball Point needle pushes aside the fiber it encounters in penetration and thereby avoids making a damaging hole in the fabric.
Needle System* : DCX1F Ball Point
One side of the shank on these needles is flat and the other is round.
*A needle system is a group of needles made to fit specific sewing machines. All needles in a system are of the same length and shank size, but are of various diameters. Lower size numbers are narrower or thinner needles used for lighter materials. Higher size numbers indicate a needle of thicker diameter, used for heavier materials. Match your needle system to your machine, then the size of the needle to the product you are sewing.
DCX1F Ball Point needles are available in following sizes.
Please select your size.
- Singer Size 9 (Metric Size 65)
- Singer Size 11 (Metric Size 75)
- Singer Size 12 (Metric Size 80)
- Singer Size 14 (Metric Size 90)
- Singer Size 16 (Metric Size 100)
These needles will fit older models of Babylock Sergers including :
Babylock : BL202, BL302, BL400, BL402, BL, 430, BL432, BL4-415, BL4-428, BL4-428D, BL4-436, BL4-436D, BL4-714, BL4-728D, BL4-736D, BL4-738D, BL4-838D, BL5040, BL5040L, BL5180, BL5260D, BL5280ED, BL5370ED, BL5380ED, BLSE200, ST600L
Simplicity : SL850, SL880
Please e-mail me with Make/Model of your sewing machine if in doubt.
