Steel Dragon Tools® MD50 Magnetic Drill Press with 7pc 1" HSS Cutter Kit

Steel Dragon Tools® MD50 Magnetic Drill Press with 7pc 1in. HSS Annular Cutter Kit This package includes the Steel Dragon Tools MD50 Magnetic Drill Press and the Steel Dragon Tools 7-piece, 1-inch cut depth high-speed steel annular cutter kit.The Steel Dragon Tools MD50 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 2 in. (50 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,900 lbs. of max force and ensures the machine will not move during the drilling process.A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools are available.MD50 Features:Suitable for drilling on any metal surface. Rack and pinion gear system for exact drilling depth.MD50 Specifications:Motor: High-Speed Series, Induction, 1850 W, 110 V, 60 Hz, 15 A Max Magnetic Force: 2,900 lbs. (13,000 N). Thinner metal will result in less force. Maximum Boring Diameter: 2 in. (50 mm) Maximum Boring Depth: 8-1/2 in. Tool Holder: 3/4-inch Weldon Shank Spindle Speed: 300 RPM Overall Weight: 52 lbs.Annular Cutter Features:SDT annular cutters will drill large holes up to ten times faster than regular drills bits. Machine-finish hole with no reaming needed when using lubricant. Make overlapping holes, slotting holes, and edge cuts. Bit size is etched on each cutter. Pilot pin helps locate the center of hole location. Pilot pin helps eject slug after drilling is complete. During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.Annular Cutter Specifications:Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin. Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in. Cutting Depth: 1 in. 3/4 in. Weldon Shank Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)This product is designed and manufactured by Steel Dragon Tools®.