Migrare F5000 Flaring Tool Drill Bit Set, 1/4’’ to 3/4" Sizes, 5 Pieces

F5000 Flaring Tool Drill Bit Set With 1/4’’ 3/8’’ 1/2’’ 5/8’’ 3/4" Bits For Soft Copper & Aluminum Tubing Designed for the most common tubing diameter in HVAC, the Spin Tools preserve copper’s/aluminum’s malleability while doing the flaring, avoiding cracks and leakage. Features: 5 Pieces Set with the most common HVAC tubing diameters Revolutionizing system for molding tubes using heat by friction Way more surface of contact between the flare and the valve Right flaring size, every single time Up to 10x faster than the conventional tools: flares in 5 seconds! Preserves copper/aluminum malleability while doing the flaring, avoiding cracks and leakages Drill Minimum Requirements The SPIN tools are designed to work along with drills and/ or screwdrivers, with minimum of 1,800 RPM and 500 watts for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN tools along with less powerful equipment may result in high decrease of performance. Tubing Wall Thickness The Flaring Spin tools are designed to work with copper tubing of 1/4’’, 3/8” and 1/2’’ with wall thickness of up to 0.8mm, and up to 1.0mm for the 5/8’’ tubing diameters. Replaces FSPIN300