Shaft Support Block, Bore Dia 0.500 In, Overall Width 0.625 In, Overall Length 2.000 In, Overall Height 1.625 In, Body Width 0.750 In, Flange Thickness 0.250 In, Mounting Surface to Shaft Center 1.000 In, Mounting Hole Dia 3/16 In, #8 Bolt Size, Dynamic Load Capacity 1950 Lb, Static Load Capacity 1950 Lb, For Use With Support and Feather Rails
Features
- Dimension V: -
- Dimension Dp: -
- Dimension F1: -
- Dimension E (In.): -
- Accelerated Speed: 14 fps
- Dimension d: -
- Dimension B (In.): -
- Dimension D (In.): -
- Overall Length (In.): 2 in
- Overall Width (mm): -
- Static Load Capacity (N): -
- Dimension S: -
- Dimension G1: -
- Body Width (In.): 0.75 in
- Retaining Ring: -
- Mounting Bolt (In.): -
- Mounting Hole Dia. (In.): 0.1875 in
- Dimension E1 (In.): -
- Slot Angle (Degrees): -
- Barrel Dia. (In.): -
- Steady State Speed - Intermittent Dry: -
- Dimension N3: -
- Dimension N2 (In.): -
- Static Load Capacity (Lb.): 1,950
- Dimension O: -
- Dimension F (In.): -
- Dimension H1: #8
- Dimension Z: -
- Dimension A1 (In.): -
- Dimension J: -
- Dimension F: 0.25 in
- Self-Alignment: -
- Dimension G1 (In.): -
- Dimension E2: -
- Dimension G (In.): -
- Steady State Speed - Continuous Dry: -
- Width: -
- Dynamic Load Capacity (Lb.): 1,950
- Dimension B: 2 in
- Dimension L (In.): -
- Dimension N Dia. (In.): -
- Dimension E1: -
- Mounting Hole Dia. (mm): -
- Overall Height (In.): 1.625 in
- Barrel Dia. (mm): -
- Liner: Frelon(TM) Gold
- Mounting Hole Center (In.): -
- Dimension G: 0.75 in
- Agency Compliance: -
- Dimension K: -
- Overall Height (mm): -
- Mounting Hole Center (mm): -
- Mounting Surface to Shaft Center (mm): -
- Dimension V (In.): -
- Body Width (mm): -
- Dimension A (In.): -
- Dimension A: 1 in
- Dimension C: 0.625 in
- Dimension Y: -
- Mounting Surface to Shaft Center (In.): 1 in
- Lubrication: No Lubrication System
- Dimension H: 0.1875 in
- Bolt Size: #8
- Dimension X: -
- Max. Pv: -
- Mounting Hole (In.): -
- Dimension M (In.): -
- Dimension N: -
- Dimension A2 (In.): -
- Dimension F1 (In.): -
- Flange Thickness (In.): 0.25 in
- Dimension A1: -
- Dimension P: -
- Height: -
- Temp. Range (F): 0 - 400
- Bore Dia. (mm): -
- Dimension S (In.): -
- Overall Width (In.): 0.625 in
- Dimension R: -
- Dimension D: 1.625 in
- Bore Dia. (In.): 0.5 in
- Dimension H2: -
- Locking Type: -
- Dimension N2: -
- Flange Dia. (In.): -
- Dimension I: 1 in
- Overall Length (mm): -
- Slot Width (In.): -
- Dynamic Load Capacity (N): -
- Dimension E: 1.5 in
- Flange Dia. (mm): -
- Flange Thickness (mm): -
- Steady State Speed: 5 fps
- Slot Width (mm): -
- Dimension C (In.): -
- Dimension A2: -
- Seal: -
- Dimension H (In.): -
- Dimension H1 (In.): -
- Shaft Dia. (In.): -
