Self-suction Hay Cutter Straw Feed Crushing And Kneading Machine 220V for Animal Husbandry

Introduction:
Precautions:
1.Before using this machine, it is necessary to conduct a comprehensive inspection and adjustment to ensure that all connections are secure and reliable, and all rotating parts must be filled with lubricating oil.
2.Before starting the motor, jog it first to check for any abnormal collision sounds. At the same time, observe whether the rotor direction is consistent with the arrow direction marked on the body. Then, start the machine and idle for 5-10 minutes, and wait until everything is normal before feeding and working normally.
3.Apply lubricating grease evenly to the rotating gears and transmission chain wheels every 12 hours of operation, and apply grease to each operating part of the machine every 24 hours of operation.
4.When the work is about to stop, the machine should idle for 3-5 minutes to remove any remaining materials from the body. After cleaning the machine, lubricate and maintain all rotating parts.

Warn：
Single-phase motor current is relatively large, 3KW motor, please use more than 4 square copper wire, wiring must be firm, it is recommended to use 63A air switch, please do not use ordinary plug socket, so as not to current enough to lead to capacitor or motor burn out! (Please strictly follow the above tips!)

Parameter:
Voltage：220V
Power：3KW
Capacity Crush：500kg/h
Cutting Grass: 2-3.8T/h
The Knife：6-Blade+Serrated Knife
Applicable：Farms Home.

Items Included: 145036
Farm Household Straw And Feed Crusher Belt Self-absorption