Yamaha FS-TA TransAcoustic Concert Acoustic-Electric Guitar Vintage Tint

Actuator
An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Simple Controls
Three simple knobs let you adjust the amount of effects and the line out volume level. Keeping the controls small minimizes the area of the holes in the body material, which reduces acoustic sound loss.

A Chorus Control

B Reverb Control Room/Hall

C TA Switch/Line Out Volume Control

Pressing the TA Switch for longer than 0.3 seconds activates the TA function.

When a cable is connected to the line out jack, the line out volume can be adjusted by rotating knob C.

The reverb type switches from Room to Hall around the 12:00 position.

Battery Box
The battery box is integrated into the end-pin jack, which requires fewer holes in the body, thus reducing acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic-electric guitar.