5M 25mm/45mm seal strip
1.Works well to keep drafts out
There may be some gaps between the door and door frame, which means that a strong current of air can go through. With this clear seal tape, it will be strong to hold between them, do the job well.
2.Tips to use sealing sticker
Clean the place you want to stick it; Dry, non-dust, non-water will result a good effection. Position the adhesive strip carefully before attaching it, don't re-position it many times which will reduce the effectiveness.
3.Appropriate color
The translucent seal sticker is transparent, you can barely see it. This color can match to the different color window glass, it will not stand out when applying it.
4.Various functions
The door sealing sticker is windproof, dust-proof, non-toxic; Insulation, arctic resistance; Strong adhesive, not easy to drop. Seriously reduce the draft coming in.
5.Applicable scope
Easy to use. Good for frameless glass doors, steel or aluminum windows, cupboards, sliding doors, door bottom, wardrobes, furniture, etc.
Specifications:
Type:Door Seal
Material: silicone rubber
Item Width:0.25 cm/0.45cm
Size: 25 mm x 5 m/ 0.98 x 196.85 inch (W x L)
Size: 45 mm x 5 m/ 0.98 x 196.85 inch (W x L)
Color: translucent
Item Diameter:0.25 cm/0.45cm
Item Length:5m/16ft
Suitable For:Glass Door
Number in Pack:1/2
Finish:Smooth
3M 120" H-type
1.Multi-function Seal Strip
Seal gap, effectively prevent water from overflowing in the bathroom and keep the bathroom clean. It is soundproof, dustproof, windproof, anti-mosquito, insect proof, etc
2.High Quality Silicone Seal Strip
Made of high quality transparent silica gel, non-toxic and environmentally friendly, without any pungent odor
3.Easy To Install
Adjust it to the required length with scissors, wipe the glass door, and stick the sealing ring on a clean surface (use glue, the effect is better)
4.Wide Range Of Sealing Strips
Suitable for shower doors, sliding doors, sliding doors, glass doors, door bottoms, suitable for 3/8" frameless glass (10 mm)
5.Suitable Length
120inch (3m) length, to meet all the needs of the bottom and side of a door
Installation Notes:
1. Wipe the dust on the glass surface before use.
2. Secure the seal to the glass.
3. Put a drop of silicone sealant or silicone glass glue between the seal and the glass every 15 cm (both sides of the glass)
4. Dry for about 8 hours to ensure it is firm before use.
5. Note: This package is not equipped with glue.
Package includes:
1 Roll 3M 120" long H-type Silicone Rubber Sealing Sticker (suitable for 3/8" frameless glass)
1 Roll 5M 25mm width Self Adhesive Seal Strip (Universal)
1 Roll 5M 45mm width Self Adhesive Seal Strip (Universal）
