Clear Ballistics Head 10% Ballistic Gel

Joe Fit Head is the next generation of ballistic testing heads. Joe Fit Head is the first-ever commercially available ballistic testing head dummy that is reusable. Made of industry-leading synthetic ballistic gelatin, this ballistic head meets the FBI protocol for calibrating ballistic gelatin to match human tissue. The design matches an average human male head with no hair and is the only testing head that can show internal trauma as well as surface impacts. Joe Fit Head is perfect for all types of testing with any ammunition, weapons, personal armor, or any other protection equipment where you need preform repeated test on the head. The Joe Fit Head will also allow you to test all types of shrapnel penetrations and impact test. This head will give you the insight on ballistic data that you could never achieve from standard ballistic gelatin due to its physical limitations. Not only will you be able to gain standard terminal ballistics data, you can now get penetrating and non-penetrating ballistic data from the same device at the same time. After performing all your tests, you can take Joe Fit Head back to the lab and really analyze all the impact areas. Joe Fit head is three-dimensional and completely resembles a normal head. Joe Fit Head comes on a base with the bottom of the base measuring in at 7 inches wide by 7 ¾ long by 2 inches in height. The top of the base measures in at 6 inches wide by 6 inches long. All sides except the front have a ½ inch taper and the front has 1 ½ inch taper. Joe Fit Head is 12 inches in height and the head is 5 ½ inches wide and from the tip of the nose to the back of the head, it measures 9 ½ inches. The total weight of the Joe Fit Head is 11.8 lbs. Note Clear Ballistics Gel can be reused, and re-melted an average of 8 to 10 times depending on how well you care for it. After the 10th time, the oil in the gel will begin to turn brown which is merely an aesthetic change. The gel will stay within calibration even if it is no longer clear.