Tomshoo 300mL Automatic Soap Dispenser Infrared Hand-free Touchless Soap Dispenser Dish Liquid Lotion Gel Shampoo Chamber Auto Dispenser for Bathroom Kitchen

Description:
Handwashing is imperative during cooking, if our hands are coated in grease or if we've been handling raw meat or poultry, the touchless soap dispenser can provide soap conveniently without contaminating your hand. The automatic soap dispenser with a smart infrared sensor provides you a sanitary, no-touch and easy-to-use experience.

Features:
[Infrared Smart Sensor]Hand-free soap dispenser comes with built-in accurate infrared smart sensor, and just 0.5 seconds sensing time to make liquid out.
[Adjustable Soap Quantity]1mL pumps out each time, if you need more please stay your hands and wait another 2 seconds later, it will pump out again.
[-leakage]The sealed rubber material on the soap dispenser bottom will soap leakage, and keep dispenser not be sliding around your countertop.
[IPX6 Waterproof]Touchless soap dispenser with IP67 rating deep waterproof technology to the soap or water to corrode circuit board.
[Visible Window]A visible window acts as a reminder to monitoring liquid remaining and get in time to refill the soap.

Specifications:
Color: Light Brown; Dark Brown; Silver(This has no stripes, the picture is reflective); Blue (Optional)
Material: ABS
Style: Modern
Use mode: Infrared Induction
Induction distance: 2-3inch
Capacity: 300mL
Waterproof: IPX6
Temperature: 3-40℃
Working Voltage: DC
Power Supply: 4*AAA Battery(Not Included)
Occasion: Kitchen, Bathroom, Hotel, Bank, Hospital, etc
Product Size: 7.2*14.2*22cm / 2.83*5.59*8.66inch
Package Size: 14.5*7.5*22.3cm / 5.7*2.95*8.77inch
Package Weight: 333g / 0.73lb

Package List:
1 * Automatic Soap Dispenser
1 * User Guide

Cautions：
1. Please follow the instructions or the product itself to properly install the battery with sufficient power, otherwise, the soap dispenser will not work.
2. Please make sure the liquid cover is well mounted. Otherwise, the liquid will come out.
3. Do not use soap that is too viscous, otherwise, it will not be smooth or cannot be discharged; too thick soap can be diluted by adding an appropriate amount of water before use.
4. When using for the first time, you can use the water test to remove the internal air.
5. For the first time you use, please try a few times first. Then the liquid will fill the hose and come out.
6.  When the light is flashing, it means the battery low. Please change the batteries.
7.  When it is not used for a long time, please check whether the internal soap liquid has deteriorated. The deteriorated soap liquid may cause the outlet to be blocked and the liquid cannot be discharged.
8.  Please do NOT shake the devices to any serious damage.
9.  The product will be tested before leaving the factory. It is normal when you receive the product with water drops.