30 PSI Turbo Gauge Blue LED Smoke Lens 2" 52mm Turbo Boost Gauge Sensor for Car AUTO 0~15V Universal

Specification:
Material: ABS plastic + aluminum ring
(-14~29) PSI Readout
Power: 12V / MAX 0.3A
Style :Blue Digital Readout
Size:2 inch gauge or 52 mm diameter
Warning light will light up when vacuum reaches over 21 psi
Universal fit for: most of cars or motors

How to installation:

1.Gauge May Be Mounted In 2"/52mm Dia holes Or In Auto Gauge Custom Mounted Panels .Secure Gauge With Mounting Clamps Supplied.

2.Drill 3/8" Dia .
Holes And Install Rubber Grommets Where Pressure Or Vacuum Line Passes Through Sheet Mental Such As Firewall.

3.Attach Nylon Pressure Line To Fitting On Back Of Gauge Using Adaptor ,Ferrule ,And Compression nut .
Route Line Through Grommets To Engine Compartment .
Connect Line To Pressure port On Engine By Using 1/8" Adaptor Ferrule And Compression Nut For Turbo And Prossure Gauge Or 1/8" Adaptor And Fitting For Vacuum Gauge.

4.Start Engine And Thoroughly Check Installation For Leaks.
Twist In Light Socket Assembly And Connect One Wire(Yellow) To Dash Lighting Circut Or Other 12V Power Source And The Other Wire(Black) To A Good Ground.

Package :
1 X Boost Gauge
1 X Sensor
1 X PVC Hose(6 feet)
1 X T-Fitting
1 X Air Filter