Forster Bench Rest Ultra 28 Nosler Full Length Sizing, Bullet Seating 2 Die Set

The Forster Bench Rest Ultra 2-Die set includes Bench Rest Full Length Sizing Die and Bench Rest Ultra Micrometer Seater Die.

Accessories:

• Two Lock Rings
• Storage Box

Notes:

• If using Forster Dies in a Forster Co-Ax press shellholders are not required since Forster presses do not require a shellholder.
• If using Forster Dies in any non-Forster press use shellholders that are recommended by the press manufacturer of the press being used.
• The Ultra Seating die allows you to adjust the seating depth to .001" or even .0005" increments. After the bullet has been seated close to the desired depth take a measurement. Adjust the micrometer stem down to the desired depth and the cartridge will be exactly the desired length needed.

• The sizing die is designed to resize the case neck's outside diameter and headspace length to keep the case neck in better alignment with the case's center line.

• Elevated expander button allows better alignment of case and neck.
• Non-crimping seating die allows the bullet and case to be held in perfect alignment during seating.