DAE WP-1200P 12" Woltmann Helix Water Meter, Pulse Output, Gallon

12 inch Woltmann Helix Water Meter with Pulse Output, Measuring in Gallon. Only two wire connection between water meter and AMR or AMR130AN or CO-10. It is not required for additional power source. Connection: ASME Class 125 Flanges per B16.1. Sealed Dry Dial for Clear Readings. Meter must be installed with direction of flow as indicated by arrow cast into the meter body. Install valve before inlet of meter. A valve at outlet is also recommended. Install meter in a location with at least 10 diameters of straight pipe at the inlet and 5 diameters at the outlet to assure proper flow profile to meter. Unit: US Gallon. Accuracy: ±2% as per AWWA C701 test procedure. Pulse Output: 1 pulse per 10000 gallons, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The third party system should not generate electricity more than 0.01A (typically 0.005A like DAE AMR), 24VAC/DC. Meter Body: Cast iron, epoxy coated. Item dimension: 19.25 inch length, 19.1 inch width, 21 inch height. Weight: 232 lbs. Max. Reading: 99,999,999,990 Gallons, Min. Reading 10 Gallon. The 1st digit from the right has a multiplier of 100000 gallons. Reading on 1st picture of the listing is 44890 Gallons. The max. working pressure is 232 psi, exceeding the requirement from AWWA standard 150 psi. Max temperature: 104F (40C). Conforms to AWWA C701 and ISO4064, for City water only. The meter register assembly can be removed for repair or replacement without disrupting the process flow. Operate at low pressure loss and offer excellent accuracy. Maximum Flow Rate: 5000 GPM, Nominal Flow Rate: 3300 GPM (Pressure Drop: 0.45 psi), Minimum Flow Rate: 120 GPM. For the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.