Metallic Pearl Pigments for High Gloss Epoxy Flooring. Blonde

Dura-Kote Metallics are an exciting new seamless flooring system that provides a unique three dimensional appearance with suspended reflective pigments. Vast options offered within this system, one Dura-Kote Metallic can create floors that range from the elegantly stylish to outrageously bazaar. The exceptionally durable epoxy combined with a polyurethane or polyaspartic top coat make this flooring system ideally suited for nearly any commercial (bars, clubs, retail stores, automotive showrooms etc.) or residential (residential interiors, garage floors etc.) setting. Unlike with solid-color pigment or chips, no two metallic floors are alike, their appearances are completely dependent upon the artisan's abilities and design ideas. These floors utilize a clear 100% solids epoxy or water-based epoxy, and the translucent floors are colored by Dura-Kote Metallic Pearls. A glossy and deep-looking floor created by these coatings can contain a variety of colors and visual effects. Some even have a beautiful three-dimensional appearance that gives the illusion of craters, ripples, and swirling rivers of metallic-looking plasma. Maintenance is easy, and the amount of light they reflect is outstanding due to the glossy nature of the surface. There are 20 available reflective pigments that can combine with literally 100's of colors in the Dura-Kote Epoxies PACKAGING 1—pint (.47 liter) MIXING RATIO 1—pint (.47 liter) metallics to 3—gallon (11.4 liter) epoxy kit Note: Dura-Kote Epoxy 100 Top Coat Clear is the carrier medium for Dura-Kote Metallics COVERAGE 40 – 70 ft² per gal. (3.7 – 6.5 m² per 3.8 liter) 23—40 mils Please note: YOU ARE PURCHASING ONLY METALLIC PIGMENT. Additional information. The whole Epoxy Metallic coat system includes: 1. Primer Coat: Dura-Kote Pigmented Epoxy 100 OR Dura-Kote Water Based Pigmented Epoxy Coating (1 Gal Kit) (As 1st coat approximately 125 - 175 ft² per gal. For smooth surface or second coat approximately 200 -250 ft² per gal.) Top (Metallic) Coat: Mix of: Dura-Kote Metallics 1—pint (.47 liter) to Dura-Kote Clear Epoxy 100 (DK 500) 3—gallon (11.4 liter) epoxy kit 40 – 70 ft² per gal., i.e. 120 – 210 ft² for 3 Gallon Kit Finish Coat Dura-Kote PFC 120 or Dura-Kote Polyurethane WB Optional: SureGrip (Non Slip Sealer Additive HD)