Chicken Feed Pellet Mill Machine Body Three-Head Fuselage Commercial 220V

Introduction:

Feed granulator is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.

Note:

Before using the machine, it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined, and the three adjusting screws should be on the same horizontal plane.

Please fill the oil tank before using the machine. Do not idle the machine for more than 2 minutes.

Double-check the belt and the screws before operation.

Clean up the rest after use to prevent damage to the machine.

If the pressure roller cannot rotate normally, please tighten the screws that control the pressure roller first, and then try to power it on. If it still does not work, you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening)

This machine only has a body without a pressure plate. Customers can purchase it separately if they need. We have 2MM, 3MM, 4MM, 5MM, 6MM, 8MM, 10MM, 12MM plate sizes for customers to choose.

We suggest that high-power machines should be directly connected to the main power supply, as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor, it is easy to burn out the starting capacitor.

It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time.



Parameter:

Length: 32.67IN(83CM)

Width: 12.99IN(33CM)

Height: 30.18IN(76.5CM)



Items Included: 239551-EnzY

Chicken Feed Pellet Mill Machine Body