Hero image 0 of Rockville W12K6D4 V2 12" 2400 Watt Car Audio Subwoofer+Vented Sub Box Enclosure, 0 of 11

Rockville W12K6D4 V2 12" 2400 Watt Car Audio Subwoofer+Vented Sub Box Enclosure

(No ratings yet)

Key item features

Package Includes: (1)Rockville 12" Car Audio Subwoofer. (1)Rockville Single 12 1.22 cu.ft. 3/4" MDF Vented Subwoofer Enclosure Box. 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. Features: Rockville W12K6D4 V2 K6 Series 12" Dual 4-Ohm Car Subwoofer. Peak Power Handling: 2400 Watts. Program Power Handling: 1200 Watts. CEA Rated RMS Power Handling: 600 Watts
2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer. Double Stacked 100 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
Red Stitching Cone Reinforcement Ensures Long Life. Polypropylene (PP) Dustcap. Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire. Impedance: Dual 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation. Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet. Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
High BL Magnetic Motor Gap. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 11.125 inches. Mounting Depth: 5.75 inches. Frequency Response: 27 Hz - 1.5 kHz. 8mm T-Yoke + 8mm Washer. Sensitivity: 85dB. Sealed Enclosure Volume: 1.0 - 1.5 Cubic Feet. Vented/Ported Enclosure Volume: 1.65 - 2.5 Cubic Feet. Weight: 17.64 Lbs.. Shipping Weight: 22.05 Lbs.
Shipping Box Dimensions: 15.75" x 15.75" x 13.6" Inches. XMAX:22 MM (One way). Detailed Info: Body: Non-Pressed Paper. Gap Plate Inside Diameter: 80mm (3.14 inches). Gap Plate Outside Diameter: 156mm (6.14 inches). Gap Plate Thickness: 20mm (0.8 inches). Yoke Outside Diameter: 145mm (5.71 inches). Yoke Thickness: 8mm (0.31 inches). Yoke Pole Diameter: 60mm (2.4 inches). Features: Rockville RSV12 Single 12" Vented Subwoofer Enclosure

Specs

Rms power rating
600 W
Woofer size
12 in
Subwoofer type
Subwoofer
Brand
Rockville
Subwoofer enclosure type
Vented
Impedance
4 ohm

Current price is $172.90

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $24.00

4-Year Plan - $34.00

How do you want your item?

Ships to

Arrives between May 23 - May 27

Sold and shipped by Audiosavings

4.292964244521338 stars out of 5, based on 1734 seller reviews(4.3)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Package Includes:
(1) Rockville 12" Car Audio Subwoofer
(1) Rockville Single 12” 1.22 cu.ft. 3/4" MDF Vented Subwoofer Enclosure Box
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals

Video of W12K6D4 V2:

Features:
Rockville W12K6D4 V2 K6 Series 12" Dual 4-Ohm Car Subwoofer
Peak Power Handling: 2400 Watts
Program Power Handling: 1200 Watts
CEA Rated RMS Power Handling: 600 Watts
2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire

Features of RSV12:
Rockville RSV12 Single 12" Vented Subwoofer Enclosure
Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
3/4" USA Heavy Duty MDF Construction
Machine precision cut mounting holes

Includes:
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Package Includes: (1)Rockville 12" Car Audio Subwoofer. (1)Rockville Single 12 1.22 cu.ft. 3/4" MDF Vented Subwoofer Enclosure Box. 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. Features: Rockville W12K6D4 V2 K6 Series 12" Dual 4-Ohm Car Subwoofer. Peak Power Handling: 2400 Watts. Program Power Handling: 1200 Watts. CEA Rated RMS Power Handling: 600 Watts
2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer. Double Stacked 100 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
Red Stitching Cone Reinforcement Ensures Long Life. Polypropylene (PP) Dustcap. Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire. Impedance: Dual 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation. Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet. Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
High BL Magnetic Motor Gap. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Cutout Diameter: 11.125 inches. Mounting Depth: 5.75 inches. Frequency Response: 27 Hz - 1.5 kHz. 8mm T-Yoke + 8mm Washer. Sensitivity: 85dB. Sealed Enclosure Volume: 1.0 - 1.5 Cubic Feet. Vented/Ported Enclosure Volume: 1.65 - 2.5 Cubic Feet. Weight: 17.64 Lbs.. Shipping Weight: 22.05 Lbs.
Shipping Box Dimensions: 15.75" x 15.75" x 13.6" Inches. XMAX:22 MM (One way). Detailed Info: Body: Non-Pressed Paper. Gap Plate Inside Diameter: 80mm (3.14 inches). Gap Plate Outside Diameter: 156mm (6.14 inches). Gap Plate Thickness: 20mm (0.8 inches). Yoke Outside Diameter: 145mm (5.71 inches). Yoke Thickness: 8mm (0.31 inches). Yoke Pole Diameter: 60mm (2.4 inches). Features: Rockville RSV12 Single 12" Vented Subwoofer Enclosure

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Rms power rating

600 W

Woofer size

12 in

Subwoofer type

Subwoofer

Brand

Rockville

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.