Real time clock: The display format is [HH:MM:SS] in hours minutes seconds. You can choose to display in 12 hour 24 hour time display format. The timer will display in real time 12 hour display mode when plugged in. You need to adjust it to your local time.
Countdown: The display format is [dn MM:SS]. MM means minutes and SS means seconds. It supports as much as to 99 minutes and 59 seconds. You can prog a start time between 99:59 and 00:00 to run a countdown and stop at 00:00. Pause & continue is allowed If your countdown is always the same like in a speech with the same time for spokesmen, you can start over with one-k button on the remote control, which save your time on re-progming your setup.
Buzzer sound is available for countdown function. When countdown ends, it beeps once and lasts for about 3 seconds.
Count-up: The display format is [UP MM:SS]. MM means minutes and SS means seconds. It supports as much as to 99 minutes and 59 seconds. You can prog a stop time between 99:59 and 00:00. It always start at [UP 00:00] and stop at the time you set up. You can start over as well like countdown with one-k button on remote control.
Buzzer sound is also available for count up. When count-up ends, it beeps once and lasts for about 3 seconds. 10 seconds preparation countdown is also available for count-up. The buzzer starts to beep at 3, 2, 1 and the first start time [UP 00:00]. Sound at 00 is just a little bit longer (appr. 1 second).
