Lar sandpaper circle----10 small 12 small
3 plastic brushes, 3 steel wire brushes, and 3 copper wire brushes. Each has three shapes: disc, broom, and bowl. Suitable for paint removal, rust removal, decontamination, deburring, cleaning and other purposes. Choose brushes of different materials according to the hardness of the processing object. Plastic brushes are soft (suitable for plastic wood), copper wire brushes are centered (suitable for soft metals such as copper and aluminum), and wire brushes are hard (suitable for steel, iron, and jade).
2 cans of grinding paste, used tother with the polishing head.
4 chuc, used to clamp drills or grinding heads of different diameters.
There are 10 disc-shaped grinding wheels, suitable for grooving wood or plastic, and can also be used for metal grinding.
1 Whetstone, used to sharpen the cutting ed of the drill.
3 fixed shafts for cutting discs and 1 fixed shaft for polishing wheels.
One louver sandpaper wheel can be used for pre-grinding before polishing.
1 chuck locking wrench.
5 pieces of double-mesh lar cutting discs. It is easy to cut steel plates with it, and it is also very . Because of its lar diameter (35MM), it is more suitable for cutting straight lines, while small resin cutting blades are suitable for cutting curves. If you want to open a regular lar window on the steel plate, then give priority to using double-mesh lar cutting discs.
1 can of resin cutting discs and 1 can of sandpaper discs, totaling about 70 pieces, 20mm in diameter. The cutting piece is a sharp tool for the transformation of MOD case. The side panel of the computer case below 3mm can be cut with it, and exquisite patterns can be cut out.
Spot: Green
set, Tool Parts, Tools
