Note:
1.these items should be matched with a glue gun and glue sticks to use.
2. When the glue is still warm, the stickiness is strongest. So please use the puller before the glue gets cold.
3. If there are any questions, please feel free to contact us, we'll try our best to help you.
Package list:
1xToolkit
1x Mini glue gun
1x bridge Dent Puller
1x alcohol bottle
1x blue rag
1x 2 in 1 T puller
1xAluminum Tap Down With Assorted Tips
1x rubber hammer
1x rubber shovel
10x glue stick
18x glue pulling tabs
1x Instructions
How to use dent repair kits?
1. Clean the dent with a clean wet cloth;
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing gasket. A large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the gold dent lifter and press the drawing gasket with hot melt glue, pull the sliding rod backward to pull up the dent;
7. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
