Hero image 0 of D12 Motor Speed Controller Frequency Inverter Converter 0.75/1.5/2.2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD, 0 of 6

Eugene Color

D12 Motor Speed Controller Frequency Inverter Converter 0.75/1.5/2.2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD

Name: D12 Motor Speed Controller Frequency Inverter Converter 0.75/1.5/2.2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD
Brand: Eugene Color
SKU: 7215759486
Availability: OutOfStock

(No ratings yet)

D12 Motor Speed Controller Frequency Inverter Converter 0.75/1.5/2.2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD D12 Motor Speed Controller Frequency Inverter Converter 0 75 1 5 2 2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD D12 Motor Speed Controller Frequency Inverter Converter 0 75 1 5 2 2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD D12 Motor Speed Controller Frequency Inverter Converter 0 75 1 5 2 2KW 1phase Input And 3phase 220 380V Output 50Hz 60Hz VFD

Key item features

Technical Index and Specification
Input :
1.Rated Voltage : 1-phase 220;3-phase 380V ;50/60HZ
2.Allowed Voltage : 1-phase 220-240V;3-phase 380~440V.
Output:
1.Voltage : 1- phase 0~240V ; 3-phase 0~440V
2.Frequency : Low frequency mode: 0-60HZ ; High frequency mode: 0-999HZ
3.Overload : G type: 110% for long-term, 120% for 1 min, 150% for 5s
Control Mode :V/F control
Protective Function :Overcurrent, overvoltage, undervoltage, module fault, electric thermal relay, overheat, short circuit, default phase of input and output, motor parameter adjustment abnormality, internal memory fault, etc.
Safety Precaution:
1. Before wring, please make sure that the input power is off.
2. The wring work should be operated by the professional electrical engineer.
3. The grounding terminals must be connected with the ground.
4. Having paused circuit wiring emergently, please make sure that the check is effective.
5. Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited.
6. Please check whether the voltage of the AC main circuit power is consistent with the rated voltage of the inverter.
7. Do not do the voltage withstand test on the inverter.
8. Please connect the brake resistor according to the wiring diagram.
9. Do not connect the power to the U, V, W output terminals.
10. Do not connect the contactor with the output circuit.

Specs

Vehicle model
1PH-3PH
Vehicle fitment type
Specific
Brand
Eugene Color
Color
Other
Pieces
1
Model
1PH-3PH

Price when purchased online

Not Available

How do you want your item?

Not available

Report an issue with this seller

About this item

Product details

1. Before wring, please make sure that the input power is off.

2. The wring work should be operated by the professional electrical engineer.

3. The grounding terminals must be connected with the ground.

4. Having paused circuit wiring emergently, please make sure that the check is effective.

5. Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited.

Technical Index and Specification
Input :
1.Rated Voltage : 1-phase 220;3-phase 380V ;50/60HZ
2.Allowed Voltage : 1-phase 220-240V;3-phase 380~440V.
Output:
1.Voltage : 1- phase 0~240V ; 3-phase 0~440V
2.Frequency : Low frequency mode: 0-60HZ ; High frequency mode: 0-999HZ
3.Overload : G type: 110% for long-term, 120% for 1 min, 150% for 5s
Control Mode :V/F control
Protective Function :Overcurrent, overvoltage, undervoltage, module fault, electric thermal relay, overheat, short circuit, default phase of input and output, motor parameter adjustment abnormality, internal memory fault, etc.
Safety Precaution:
1. Before wring, please make sure that the input power is off.
2. The wring work should be operated by the professional electrical engineer.
3. The grounding terminals must be connected with the ground.
4. Having paused circuit wiring emergently, please make sure that the check is effective.
5. Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited.
6. Please check whether the voltage of the AC main circuit power is consistent with the rated voltage of the inverter.
7. Do not do the voltage withstand test on the inverter.
8. Please connect the brake resistor according to the wiring diagram.
9. Do not connect the power to the U, V, W output terminals.
10. Do not connect the contactor with the output circuit.