Description
The hot wire foam cutting machine is made of high-quality wood and stainless steel, which are strong, durable, not easy to deform, and not easy to rust. The 0.2mm diameter electric heating wire can achieve fast heating as well as cutting with high efficiency, which can save you a lot of time and effort. The versatile cutting can meet your basic needs.
Details
Round-cutting Aid: The round-cutting aid can assist in round-cutting, and the cut-out circle is more regular, which can make cutting more convenient.
Adjustable Bracket: The bracket can be moved left and right to adjust the cutting angle. It is more convenient and easy for you to cut the shape you need.
Adjustable Electric Heating Wire: The electric heating wire can be moved left and right, making it more convenient to use.
Application
It is mainly used to cut low-density（≤40kg/m³） foam materials, such as foam, low-density（≤40kg/m³） sponge, pearl cotton, KT board, extruded plastic board, etc. It can cut angles, cylinders, sharp cones, rings, tapers, straight lines, and other shapes.
Specification
Color: Black, Silver
Model: T21
Material: Wood, Stainless Steel
Power Source: AC
Voltage: 110V/220V
Power: 30w
Temperature Range: 50-300℃/122-572℉
Power Cord Length: 1m/3.28ft
Tabletop Size: 38*78cm/14*30inch
Effective Cutting Height: 20cm/7inch
Electric Heating Wire Diameter: 0.2mm/0.007inch
Package Weight: 5.5kg/12.1lbs
Package Size: 82*42*14cm/32*16*5inch
Installation
- Mount the bracket on the board and fix them with screws, and tighten the screws with an Allen key.
- Insert the wire through the wire hole and penetrate it through the board, fix it on the back of the board.
- The installation is complete.
Package Included
1* Hot Wire Foam Cutting Machine
1* Power Cord
1* Round Cutting Aid
1* Allen Key
1* English Manual
Notes
- Usually, the electric wire is not red or slightly red is suitable for cutting. It cannot be used if the wire is very red.
- When cutting, the wire temperature is very high. Please keep this product away from flammable and explosive materials.
- It is recommended to wear work gloves when cutting.
- Please cut off the power in time when complete cutting.
- Some materials may have a smell when cutting. It's recommended to cut in a ventilation environment.
- Unplugging or removing the electric heating wire must be run with the machine completely cool.
- Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
