Product Overview:
● Crawler pin remover for chain dismounting machine, using the principle of converting hydraulic energy into mechanical energy, is a special tool for dismantling the crawler pin of the crawler excavator. The electric pump is used as the power source to make the hydraulic jack move forward. Therefore, the pin shaft can be removed smoothly, which is a special tool for the maintenance and assembly of the crawler excavator.
● Excavator maintenance pressing chain machine is widely used in electric power construction, excavator repair, construction engineering and ship repair industries
Product Parameter
1. Rated voltage: 220V
2. Rated power: 1500W
3. Weight: 284.17lbs+105.6lbs
4. Chain range: <50mm/1.97in
5. Pressure sleeve range: <150mm/5.91in
6. Screw diameter: 40/50mm(1.57in/1.97in)
7. Screw length: 1000mm/39.37in
8. Cylinder stroke: 100mm/3.937in
9. Operating pressure: 0-63Mpa
10. Pump station volume: 24L
11. Application scenarios: electric power, iron and steel mines, large machinery and equipment, railway industry, etc.
Note:
1. There will be a little error in manual measurement.
2. The tank should be filled with hydraulic oil, and then powered on to start, otherwise the pump station will be damaged and pay for itself.
3. The pump station needs to add 46 # or 68 # anti-wear hydraulic oil by yourself.
Item Included: 022486
220V 110T Chain Pressing Sleeve Pressing Machine for Excavators, Loaders Chain Repairing
