Heat Fab 4727SS Saf-T Vent 7\" Diameter - 304 Support Clamp

 

Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or cables. Use in pairs by clamping around the outer jacket and suspend from a single rod or cable. Support clamps by themselves do not maintain the necessary clearances to combustible materials; be sure to consider clearances and proper pitch when planning the system. Support clamps are sold in pairs, with two half-shells and two ¼-20 nuts and bolts. Never drill or screw through the Saf-T Vent SC inner vent conduit.

• Heat Fab 4727SS
• 7" Diameter
• Support Clamp
• Saf-T Vent
• Made from Type 304 stainless steel
• Use on horizontal systems to provide support at the required 6-foot intervals
• Use singly as a saddle
• Use in pairs by clamping around the outer jacket and suspend from a single rod or cable
• Sold in pairs, with two half-shells and two ¼-20 nuts and bolts

	EZ Seal Catalog & Dimensional Data
	EZ Seal Brochure
	Heatfab Weight Per Foot
	View Adapter Chart
	EZ Seal Install (3" to 5")
	EZ Seal Install (6" to 16")