Rice Milling Machine Peeling Grinding Brown Rice Commercial 130-170KG/H 220V 1.8KW

Introduction:

This machine can achieve the peeling function of rice and millet, as well as the appropriate crushing function of rice, millet, and corn. It is suitable for households, livestock farms, traditional Chinese medicine stores, farms, pastures, pet farms, fish farms, feed factories, and so on. The rice and millet enter the rice milling chamber through the feeder, and then the rice is squeezed by the bearings and rice blades. In this step, the rice will be hulled and discharged to the discharge port, with a unique discharge port design separating the whole rice from the broken rice. The broken rice bran will enter the bran bag through a sieve, and users can use bran powder as feed.

Note:

The machine should be placed in a dry, bright and ventilated environment;

The machine is not allowed to be wet state, especially the motor is not allowed to have any wet state;

The magnet should be installed at the entrance of the feeding hopper to avoid metal and the hard stuff from entering the machine chamber.(Our machine is not equipped with magnets and requires customers to purchase and place them themselves.)

It is forbidden for machines to process iron filings, coal, wood, stones, and other hard objects.

Precautions for Operation:

In order to ensure the safety and normal operation of the person and the machine, a special person shall be assigned to be responsible for the storage and use of the machine. The machine shall not be operated without learning this procedure and operation technology and reading the familiar instructions. Please check the machine before the first use.

Whether the triangle belt is too loose or too tight; the triangle belt should be kept parallel and perpendicular;

Whether each assembly bolts are fastened;

Whether the motor is installed in parallel;

Whether the rotation direction of the motor and machine is correct;

The power cord shall not be damaged;

The protective cover shall be well assembled;

After checked the completion of 1-6 precautions, turn the power supply on to make the machine running idly for 1-2 minutes.

Prohibit the minors and the elderly from operating the machine;

Prohibit the handicapped from operating the machine;

Do NOT operate the machine after drinking; Do NOT feed agricultural materials before starting the machine; Do NOT remove the protective cover when operating the machine;

Make the machine running idly for inspection before each use;

If abnormal noise is detected, turn off the power immediately, pull out the plug and then inspect the machine;

No metal or the hard stuff can be mixed in the agricultural materials (if metal or the hard stuff entered the machine, turn off the power in time for cleaning); If the machine breaks down, metal or the hard stuff enters the machine, stop the machine and clear fault. Rotate the machine by hand to check whether the machine is normal and whether each component is damaged. The test of running machine idly must be implemented to ensure that no damage to each component and the machine is intact before starting the power supply and pouring in the agricultural materials. (The operator is not allowed too near the machine when starting the power. The machine can continue to operate after normal running idly);



Parameter:

Product Material: Cast Iron Spray Painting

Production Efficiency: 130-170KG

Diameter of Rice Outlet Net: 2.5MM

Power: 1.8KW

Voltage: 220V

Whole Meter Rate: 85%-90%

Applicable Product: Rice, Millet, Corn



Items Included: 239765-EnzY

Rice Milling Machine