Evolution Gun Works Picatinny Rail Scope Mount, CVA Inline Muzzleloader

Machined From: Domestic 6061 T6 Extruded AluminumFinish: Matte Black OnlyMounting Hardware:#8-40 X 1/4 Screws and T-10 Bit IncludedCenter Spread: 2.361"Overall Length of Mount: 6.67"The center spread is the distance between the two middle holes, center to center, on your receiver.This base sits at approximately 0.4 high.If your CVA is a 2010 or newer model, or any Centerfire, please choose our CENTERFIRE mount. If your muzzle loader is 2009 or older, please choose our MUZZLE LOADER mount.The CVA V2 mount is available hereCVA V2.Custom silver anodizing is available upon request, for an additional charge of 15 (a lead time of approximately 3 months is also associated with this custom anodizing. Please call us if you are interested in placing a custom order).Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGWs one piece scope mounts are the obvious choice for hunters and tactical shooters alike.This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGWs Practical or HD Scope Rings to make it a complete overhaul!We machine these in our shop using one of our made in specialized factories Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in specialized factories.Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).