PH1150-6 1.5 HP 3450 Rpm, 115V Above Ground Pool Pump

The pump has a large 6 in. debris basket. It is connected to the pump housing with a union nut, this makes it easy if you need to rotated the head, as the basket can be remounted with no problem once you have rotated the head. Pumps come with a 3 ft. long power cord, with the standard 3 prong plug. This pump is ready to go when you receive it. Simply remove the pump from the box, open the cover on the debris basket, where you will find the gasket that needs to be inserted into the basket nut and then simply install the basket on the face of the pump. Reinstall your hoses from your old pump, connect them to the pool filter and simply plug in the pump. Of course be sure the pump is full of water before you power up the pump so that you do not burn up the pump shaft seal.

• 1.5 hp, 1-Speed, 12 amps, 115V 60hz - Automatic Overload Protection.
• Hi-Flo Side Discharge
• On/Off Switch on bottom of motor cover
• Dimension - 10.87 L x 7.62 W x 24.37 H in.