Tailgate Power Lift Support for Ford Explorer 16-19 for Ford Police Interceptor 17-19 No.GB5Z78406A10A

Fitment: for Ford Explorer Base, Limited, Platinum, Sport, XLT 2016-2019 2.3L L4 Gas, 3.5L V6 Gas, for Ford Police Interceptor Utility Base 2016 3.5L 3.7L V6 Gas, 3.7L V6 Flex, for Ford Police Interceptor Utility Base 2017-2019 3.5L V6 Gas, 3.7L V6 Flex. Feature: This power lift struts shock use anti corrosion sleeve with Carbon Steel mounting bracket to prevent rust or deform. Pre-wired harness to prevent inside wires from rust or break. Built-in electric motor will driving and guide the electric strut to extend or contract. This is a non-OEM product, accessory only! Installation: 1. Keep the tailgate door open on max height and remove inner trim panel; 2. Use tools to loose the old spherical joint and insert new one; 3. Recover the inner trim panel; 4. Use diagnostic scanner to clear error code, just use scanner to clear if show negative/occasional; replace the lift struts if show permanent. Please confirm the L/R mark on struts before install it on your tailgate. Use below method to active tailgate remote function: 1. Push the trunk close button; or 2. Close the tailgate by hand slowly and push the trunk open button; or 3. Use diagnostic instrument to reset control module and push trunk close button. Notice: Please confirm car make, model, year and oe number before purchase. Please allow 1-3mm manual measurement error.