Ford F-150 Pre-Cut Vinyl Overlay Tint Headlight Covers Plus (2021 2022) LIGHT

First off , I've installed several vinyl headlight covers in past. Noted, that if you're putting this on a curved headlight especially with dips, Etc, it is going to be a real challenge. The exception may be if you're a previous professional vinyl headlight protect installer so on and so forth. Of course I followed the instructions and utilized a blow dryer. The flat areas are really no problem and the vinyl is thin compared to other products I've used in the past which is probably because it needs to be to enable stretching and filling in dips and curves etc. I attempted to install this on a 2022 F150 headlight and it was extremely tedious. The frame of the headlight has a concave dip which is next to impossible to fill in with this final headliner even when putting the blow dryer in high and hot. Again you have to be pretty skilled with this technique I think to pull it off. I tried both headlights with the intention of trial and error and then perhaps buying another set but no go. After scrapping both of the headlight covers identity the fog lights which were slightly easier although a small working area to use so you'll have to use your thumb to get out the creases and air bubbles. Forget about it. I think the manufacturer should have simply made a smaller headlight cover to get the simple curvature of 90% of the headlight surface and left the frame concave and eyebrow of the headlight as a separate piece, or separate design for the experts. Disappointed.