S-A-A-2 Vector Network Analyzer Digital Tester USB Logic Antenna Analyzer Standing Wave
S-A-A-2 Vector Network Analyzer Digital Tester USB Logic Antenna Analyzer Standing Wave
Hero image 0 of S-A-A-2 Vector Network Analyzer Digital Tester USB Logic Antenna Analyzer Standing Wave, 0 of 6

S-A-A-2 Vector Network Analyzer Digital Tester USB Logic Antenna Analyzer Standing Wave

(No ratings yet)

Key item features

  • Type 1
  • portable vector network analyzer is a new product developed on the basis . It uses a 4.3-inch IPS LCD and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, support Chinese and English interface. The design of this product is based on edy555's S-A-A V2, and deep optimization of the software is made on the basis of the previous product. The operation interface is compatible , the measurement ranges is extended to 3GHz, and the dynamic ranges is larger. The measurement is more accurate and the operation is more convenient.
  • Features:
  • 4.3-inch IPS LCD, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.
  • All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy.
  • The radio frequency interface is SMA, which is convenient for connecting various tested parts.
  • Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.
  • Support Chinese and English interface.
  • Optimized UI design, convenient for users to perform measurement operations.
  • Support screen brightness adjustment.
  • The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable.
  • Standard fine quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.
  • Designed with USB power output interface, which can support 5V/1A power output.
  • Using 2A high current recharging IC, the recharging time is shorter.
  • Supporting host computer software, the host computer supports Chinese and English interfaces.
  • The screen images of the device can be obtained by taking a screenshot of the host computer.
  • Function: can measure S parameters, voltage standing waves ratio, Smith chart, phase, group delay, etc.
  • Specifications:
  • Material: aluminum alloy(case)
  • Main color: black
  • Battery: 1 * lithium battery, 5000mAh
  • Frequency: 50kHz-3GHz
  • RF output power: -9dBm (error within 1GHz: ±1dB)
  • Frequency accuracy: <0.5ppm
  • S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz)
  • S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
  • 2-port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
  • Number of calibration points: 101 points
  • Number of scanning points: 101 points
  • Number of traces: 4
  • Number of mark points: 4 (the mark point bar can be moved up and down on the screen)
  • USB interface: USB Type-C communication mode: CDC (serial)
  • Setting save: 5 groups (after saving, it can be directly recalled when it is used again, no need to recalibrate, and the saved parameters before the last shutdown will be automatically recalled when it is turned on again)
  • Support calibration result interpolation, can measure without recalibration after adjusting the measurement frequency band
  • Scan time: about 1.9s/1 time (50kHz~3000MHz full frequency band)
  • Item size: 140 * 73 * 20mm / 5.5 * 2.9 * 0.8in
  • Item weight: 270g / 9.5ounce
  • Packing size: 250 * 150 * 50mm / 9.8 * 5.9 * 2.0in
  • Packing weight: 500g / 1.1lb
  • Packing List:
  • 1 * Host
  • 1 * SMA Open Calibration Kit
  • 1 * SMA Short-circuit Calibration Kit
  • 1 * SMA 50 Load Calibration Kit
  • 1 * SMA-KK Double-Head Female Hole Adapter
  • 1 * SMA-JJ Double-Head Male Pin Adapter
  • 1 * SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter
  • 2 * 200mm SMA-JJ RG405 RF Cable
  • 1 * USB Type-C Data Cable
  • 1 * Stylus
  • Type 2
  • Made of fine quality material, practical, easy to operate and use, has a long service life.
  • Features:
  • Made of fine quality material, practical, has a long service life.
  • Portable and compact, easy to use and carry.
  • Measurement frequency range is 50KHz~3GHz.
  • High stability, high sensitivity, high accuracy, greatly improved performance.
  • Metal housing, 3.2-inch large screen is more accurate for touching, easy to operate, no need to connect power, get rid of the shackles of data cable, and can be used alone.
  • This product can reach 3G, can measure 2.4G antennas, can also measure duplexer, filter.
  • Specifications:
  • Material: PCB+metal
  • Main color: black+gold
  • Measurement frequency range: 50KHz-3GHz
  • System dynamic range (after calibration): 70dB (50k to 1.5GHz); 60dB (up to 3GHz)
  • S11 noise floor (after calibration): -50dB (up to 1.5GHz); -40dB (up to 3GHz)
  • Sweep rate: 100 points / second
  • Sweep points (on device): 10-201 points, adjustable
  • Sweep points (USB): 1-1024 points, adjustable
  • Power supply: USB, 4.6V5.5V
  • RF port: SMA
  • USB interface: Micro USB
  • screen: 3.2-inch TFT
  • Battery: 1 * lithium battery, 1950mAh (included)
  • Port 2 return loss: 13dB (up to 3GHz), 20dB (up to 1.5GHz)
  • tracking: 4, Marking: 4, Setting save: 5
  • Operating ambient temperature: 0-45
  • Item size: 115 * 80 * 27mm / 4.5 * 3.1 * 1.1in
  • Package size: 180 * 120 * 35mm / 7.1 * 4.7 * 1.4in
  • Package weight: 330g / 11.6ounce
Current price is $158.21
Price when purchased online
  • Free shipping
  • Free 30-day returns

How do you want your item?

How do you want your item?
Ships to
Arrives between May 28 - Jun 3
|
Sold and shipped by VigorMetric
3.0526315789473686 stars out of 5, based on 19 seller reviews(3.1)
Report an issue with this seller
Free 30-day returns

About this item

Product details

Specifications

Warranty

Customer ratings & reviews

0 ratings|0 reviews
This item does not have any reviews yet