TEKTON 3/8 Inch Drive Non-Quick-Release Ratchet, L-Handle, and Breaker Bar Set (10-Piece) | SDR99103

Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. Our low-profile head is reduced in every dimension: height, width, and length to increase access. The classic non-quick-release drive tang retains sockets with a spring-actuated detent ball—push the sockets onto the ratchet and pull to remove them. This release style gives the ratchet a flat back without any protruding release lever for best clearance. The sleek handle has a finger groove with pronounced interior edges for traction and control for any hand placement. Tekton ratchets meet (and most far exceed) the industry standard for proof torque, a measure of strength verified by a single-cycle test that applies torque until the specified value is reached without failure or any permanent deformation. The included 6 Inch Wobble L-Handle can be used as a complement to other drive tools, and the breaker bar can be used to reach and break free rusted or stuck nuts and bolts.