JBL VMA2120 2-Channel/Restaurant 2-Channel Amplifier+(6) JBL Black 6.5" Speakers

• (1) JBL VMA2120 2-Ch. Commercial/Restaurant 120W 70V Bluetooth Amplifier, 8 Inputs
• (3) Pairs of JBL CONTROL 16C/T-BK 6.5"" 30w 70v Commercial Ceiling Speakers 4 Restaurant/Bar

Features:

• JBL VMA2120 120 Watt 70V Mixer/Amplifier with Bluetooth and 8 Channel Inputs
• Max Output Power: 120 Watts
• Frequency Response: 20 Hz - 20 kHz
• THD (Total Harmonic Distortion): <0.5%
• Signal-to-Noise Ratio: > 76 dB
• Input Impedance: Mic: 400 Ohms, Line: 20 kOhms (balanced), RCA: 50 kOhms
• Phantom Power: 27VDC
• Crosstalk: -70 dB
• Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz
• Minimum Load Impedance: 4 Ohms, 40 Ohms, 80 Ohms
• Insertion Loss: 1 dB Maximum
• Number of Inputs: 8
• Number of Outputs: 2
• Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz
• Input Sensitivity: Mic Input: 5.5mVRMS, Line Input: 1.3VRMS, RCA Input (stereo in): 130mVRMS
• Independent bass and treble controls for each output channel
• Paging Chime, and Priority Muting
• Rack mounting hardware included

Features:

• (2) JBL CONTROL 16C/T-BK 6.5"" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar in Black
• Components:
  • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
  • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
• Blind-mount backcan for quick and easy install
• Dual conduit/cable clamps
• Combined 70V/100V and low impedance direct operation
  • 50 Watts at 8O nominal setting
  • 30W multi-tap at 70V/100V
• 62 Hz – 20 kHz bandwidth with wide 110° coverage
• High 91 dB sensitivity for high maximum SPL
• Black (-BK)

Specifications:

• Frequency Range (-10 dB): 62 Hz – 20 kHz
• Power Capacity (at low-Z)
  • 100 Watts Continuous Program Power
  • 50 Watts Continuous Pink Noise
• Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only)
• Frequency Response (±3 dB): 96 Hz – 15 kHz
• Nominal Sensitivity: 91 dB
• Nominal Coverage Angle: 110° conical coverage
• Directivity Factor (Q): 7.8
• Directivity Index (DI): 8.2 dB
• Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak
• Nominal Impedance: 8 ohms (in direct/bypass 8O setting)
• Crossover Network
  • 12 dB/oct (2nd order) low-pass to LF driver,
  • 12 dB/oct (2nd order) high-pass to HF driver
• LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil
• HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
• Input Connector: Removable locking 4-pin connector with screw-down terminals.
  Max wire size 12 AWG (2.5 mm2)
• Connector Wiring: Pin 1 = + In; P