DIY 20 Pieces 3"* 2" with 4 classic colors Multi-Color Value Pack Fabric Iron-on Patches and Other Items

Key points of the project:
Instructions:
1. Put the cloth on the position to be pasted first. Glue the clothes to one side with hot melt glue (the glue cannot be torn off). Preheat the iron and iron from the front of the cloth for 10-20 seconds to fix the cloth. You can also use needle and thread to fix the position of the cloth before ironing to avoid deviation of the cloth.
2. Rotate the fixed position of the cloth sticker and the clothes (or other textiles) and iron from the reverse side for 30-60 seconds to ensure that the adhesive melts and the cloth sticker is firmly attached to the clothes (or other textiles).
3. Iron from the front for 1-2 minutes, mainly by pressing the edges and corners of the cloth stickers to ensure that the surface is smooth and blends perfectly with the clothes (or other textiles).

Note: Cloth stickers with sequins, beads, rhinestones, silk flowers, hair balls, and cloth stickers embroidered with metal wires should be ironed from the reverse side first, and then cut the corners of the fixed side of the cloth stickers from the front to avoid damage Sequins or other ornaments on the front. Clothes (or other textiles) should be kept dry. When ironing, do not spray water on cloth stickers or clothes with an iron.
After pressing, the cloth can be tightly combined with clothes (or other textiles) for a long time. If the cloth comes off after a period of time or after washing, it means that the iron temperature is low during ironing or the ironing time is too short

Specification:
Material: Denim
Color: dark blue, sky blue, light blue, black
Type: Denim Patch
Style: Ironing
Uses: bags, clothes, hats, shoes, pants
Size: small (5*7.5cm), large (12.5*9.5)

Patch description:
1. Place the patch where you want to place it first, and apply the hot glue to the side close to the fabric or other textiles. Preheat the iron and iron the right side of the stain for 10-20 seconds to repair it. In addition, the patch can be fixed by moving it while sewing.
2. Then stick the cloth or other fabrics and iron the back of the patch for 30-60 seconds to ensure that the adhesive has melted and the patch is firmly attached to the fabric or other fabrics.
3. Finally, iron the right side for 1-2 minutes, especially the edges and corners, to get a smooth surface.

Notes:
Fabrics or other textiles should be dry. There is no need to wet the plaster or cloth when ironing.
The ironing of ironing may take a long time. If it is late or drops after washing, it means that the ironing temperature is too low or the ironing time is too short. You can use the above steps to reload the ironing patch.

The package includes:
20 pieces of denim patch (four colors, five pieces in each color)