Flexible Moulding - Flexible Half-Round Moulding - WM120-1/2" X 1" - 8' Length - Flexible Trim

Duraflex Flexible Moulding: Moisture proof. Bends like a belt around your waist. Withstands extreme heat and cold temperatures without warping, cracking or deteriorating. Seamless construction without lamination defects. For interior and exterior use. Install using standard woodworking equipment - cut, sand, shape and finish like wood. Material is Beige in color. For applications with a minimum of 6" or greater. Fastening Polyurethane construction adhesive behind and at miter joints in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing material in position while adhesives . Always install Flexible Moulding first is a relaxed non-tensile state. should be kept to a minimum and 3/8” from any edge. For best results, we recommend using Loctite PL Premium Polyurethane Construction Adhesive. Cutting Material can be cut, shaped and sanded using standard woodworking equipment. Note that the wood grain on Stain grade material is on the surface and will be eliminated if sanded. Painting Primer coats are not recommended. Use water based Acrylic Latex Paint. When using Alkyd Enamels an exterior primer such as Kilz is required. When using Alkyd Enamels additional drying time may be necessary. Never paint before installation. The material is flexible and the paint may crack during installation.