DHP Clairborne 24" Counter Height Bar Stool with Tufted Back, Set of 2, Taupe Velvet

Chairs are a bit more petite than I wanted. would be great for a small space. They are cute, comfy, and lightweight. Time will tell with durability, in a "used" house they wont last long. They are on the "cheaper" made side and it shows in some of the imperfections: loose stitching, missed stitches, chips in wood, drill holes, etc. When putting together we learned we needed to loosely bolted the top bolt of the legs and then attached all the cross bars so they would angle correctly. After that we added the bottom bolt and tighten each one (not fully), then went back and fully tighted the top and then bottom of each leg. This allowed crossbars to suction to the correct angle and holes for bolts to line up nicely. - seat height 23" (will be less when the cushion goes down when you sit) - back height 14" - chair width 18" (total with curved side) - chair length 17" (total with back depth)

bought these chairs around Thanksgiving and was really excited. only when they arrived the legs didn't work. when assembled correctly the holes didn't line up. i switched the back to legs as instructed by customer service because i must have assembled incorrectly (and i didn't but thanks) and the cross bars lined up but were all in the wrong places. when i let them know this there solution was to switch the two front legs. (NO! THAT ISN'T GOING TO HELP! ugh) i emailed back that was only going to send me back to square one with mismatched holes and no bars fitting again. i just need the legs resent with the holes in the correct position. i finally talked to someone in customers service and he finally says after a two weeks of emailing everyday and being on hold 10 min. they no longer have the legs in stock. TOTAL WASTE OF MONEY. The chair is beautiful but the legs are a close cousin to Captain Dan. Cause they aint got no legs. so only buy them if you want to either make your own legs or redrill the holes yourself. pay money to do their work. winning!