3M 2091 6000 Series NIOSH Approved 2091 P100 Respirator Filter, 2/Pack

3M 6000 Series Reusable Respirators & Cartridges/Filters are a line NIOSH approved respirators and filters designed to provide maximum protection against a variety of oil/non-oil based aerosols, organic/inorganic vapors, and particulates while also prioritizing comfort for the end-user. Soft yet firm silicone seals harnesses constructed of flexible polyester/spandex straps, and the lightweight construction makes these respirators among the least invasive and most comfortable on the market. The largest improvement however is the revolutionary Cool Flow Valve technology that pushes exhaled breath downward to avoid face shield fog while also removing moisture from the masked area to aid in ease of breathing. These comfort features combined make the masks much easier to wear for extended periods of time.

When combined with 3M approved filter cartridges, 99.97% filter efficiency can be achieved with a properly fitting respirator. This makes it safe for users to operate in concentrations of up to 10 times Permissible Exposure Limits (PEL) with half facepiece respirators, and up to 50 times PEL if using full facepiece models.

• 3M 6502QL Rugged Comfort Quick Latch Half Facepiece Reusable Respirator provides substantial protection against particulates, aerosols, and vapors from both oil and non-oil based sources via a comfortable half facepiece design. This approach allows for this mask to be combined with various types of face shields such as welding masks, safety goggles, or whatever the job may call for. The four-point quick latch mechanism makes it easy to drop down the respirator when not in use, eliminating the need to remove a hard hat or face shield.
• 3M 6800 Full Facepiece Reusable Respirator allows for substantially increased protection levels as a result of the addition of an integrated face shield. Half facepiece respirators are cleared for use in environments contaminated with up to 10 times PEL, while full facepiece respirators such as this model are safe for use in environments contaminated with up to 50 times PEL. The face shield is very sturdy for dependable protection against debris, and ANSI z87.1 2003 compliant.
• 3M 2091 Particulate filter is a P100 approved Advanced Electret Media respiratory filter that is compatible with the 3M 6000 series. Helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. Effective for concentrations up to 10 times the permissible exposure limit (PEL) with half facepieces, or 50 times PEL with properly fit tested full facepieces. The filter is both flame and water-resistant and is commonly used for welding, brazing, torch cutting, metal pouring, and soldering.
• 3M 60923 Organic Vapor/Acid Gas Cartridge/Filter is a P100 approved filter that is approved for protection against certain organic vapors, acid gases, and particulates. Effective for concentrations up to 10 times the permissible exposure limit (PEL) with half facepieces, or 50 times PEL with properly fit tested full facepieces. Not for use in environments that are considered to be immediately dangerous to life or health (IDLH).