Hero image 0 of 3 Directions Micro-adjustable Vacuum Screen Printing Press Pallet Press 20"x24", 0 of 7

3 Directions Micro-adjustable Vacuum Screen Printing Press Pallet Press 20"x24"

(No ratings yet)

Key item features

This screen printing table uses 2 mm stainless steel plate laser cutting, Suction hole diameter is 1 mm; The spacing of air holes is 15 mm. The quantity of air holes are 1044 (29 rows in horizontal direction and 36 rows in vertical direction).
Three-directions micro adjustable, it can be micro adjusted through the knob up and down , forward and back 3/4 inch, left and right 3/4 inch.
Place the substrate on the table surface and start the vacuum pump. Clamp the screen frame after aligning the screen pattern with the substrate.
Height adjustment: place the screen frame flat on the platform. According to the substrate height or printing requirements, rotate the up and down adjustment handle to reach the appropriate height, and lock the height through the two rear positioning handles.
Left and right adjustment: loosen the handle on both sides of the nose, and rotate the handle to move slightly left and right as required; When it is done, tighten both handles.
Back and forward adjustment: first, slightly loosen the four red knobs on the front of the chuck, then loosen the fine-tuning knobs on both sides of the front of the chuck and make front and rear fine-tuning as required. After the fine-tuning, tighten the knob and tighten the four red knobs on the top of the chuck.
When substrate area is too small, adsorption will reduce, you can cover the blowholes around the substrate with plastic sheets or paper to increase the adsorption of substrate.

Specs

Printing press type
Screen Printing Machine
Impression width
20 in
Impression length
24 in
Power type
Electric
Brand
Preasion
Material
Stainless Steel

Current price is $459.00

Price when purchased online

Free shipping
Free 30-day returns

Walmart Protection Plan by Allstate

(Only one option can be selected at a time)

3-Year Plan - $36.00

4-Year Plan - $49.00

How do you want your item?

Ships to

Arrives between May 23 - May 26

Sold and shipped by Sunflower'yaxun Co.Ltd

4.01123595505618 stars out of 5, based on 89 seller reviews(4.0)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Application:
This is screen printer with vacuum pallet, suitable for all kinds of high precision and exquisite plane screen printing, especially for light and thin materials like paper, plastic sheet, CD, credit card, PCB, and all kinds of film, card, board and paper.
Also suitable for all kinds of transfer paper, PVC, PET, PC and other soft/ hard film, board, paper, nameplate, and similar materials.
It can also be used for the fine printing on heavy and thick products, such as paper boxes, glass, wood boards, metal plates, signage, various plastic boards and etc.
Not suitable for cloth, ribbons, handkerchiefs and other textile products, textile materials are recommended to use the scraping pallet with glue.

Character:
1. The printing object can be tightly adsorbed on the pallet, to prevent the printing object moved by outside force.
2. After printing, vacuum pallet can keep the printing object close to the pallet can won't be lift up by ink.
3. Equip with 3 gravity balance plates, they can be installed individually or together according to weight request, it can be moved forward and back within 4 inches (10cm).
4. With the bolt in the balance rack, could adjust the lifting angle and height of the screen frame.

Parameter:
1. Pallet whole area 20x24 inches, Vacuum area is 16.5x20.7 inches
2. Clamp size: clamp size: 15.5 x 3 inches, max thickness: 2 inches
3. Suggest max screen frame size: 20x24x2 inches (50x60x5cm)
4. Suggest printing area: 16x20 inches (40x50cm)
5. Machine size about: 30x20x16 inches (75x50x40cm)
6. Stander height: about 6 inches

Item Included:006156
3 Directions Micro-adjustable Vacuum Screen Printing Press Pallet Press 20"x24"

This screen printing table uses 2 mm stainless steel plate laser cutting, Suction hole diameter is 1 mm; The spacing of air holes is 15 mm. The quantity of air holes are 1044 (29 rows in horizontal direction and 36 rows in vertical direction).
Three-directions micro adjustable, it can be micro adjusted through the knob up and down , forward and back 3/4 inch, left and right 3/4 inch.
Place the substrate on the table surface and start the vacuum pump. Clamp the screen frame after aligning the screen pattern with the substrate.
Height adjustment: place the screen frame flat on the platform. According to the substrate height or printing requirements, rotate the up and down adjustment handle to reach the appropriate height, and lock the height through the two rear positioning handles.
Left and right adjustment: loosen the handle on both sides of the nose, and rotate the handle to move slightly left and right as required; When it is done, tighten both handles.
Back and forward adjustment: first, slightly loosen the four red knobs on the front of the chuck, then loosen the fine-tuning knobs on both sides of the front of the chuck and make front and rear fine-tuning as required. After the fine-tuning, tighten the knob and tighten the four red knobs on the top of the chuck.
When substrate area is too small, adsorption will reduce, you can cover the blowholes around the substrate with plastic sheets or paper to increase the adsorption of substrate.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Printing press type

Screen Printing Machine

Impression width

20 in

Impression length

24 in

Power type

Electric

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.